Cylinder Bore: 8″ | Piston Area: 50.265 in²
At 3,000 PSI → 150,796 lbs (75.4 tons)
8″ Bore Hydraulic Cylinder Force Table
| Pressure | Force (lbs) | Force (tons) | Force (kN) |
|---|---|---|---|
| 500 PSI | 25,133 lbs | 12.6 tons | 111.8 kN |
| 1,000 PSI | 50,265 lbs | 25.1 tons | 223.6 kN |
| 1,500 PSI | 75,398 lbs | 37.7 tons | 335.4 kN |
| 2,000 PSI | 100,531 lbs | 50.3 tons | 447.2 kN |
| 2,500 PSI | 125,664 lbs | 62.8 tons | 559.0 kN |
| 3,000 PSI | 150,796 lbs | 75.4 tons | 670.8 kN |
| 3,500 PSI | 175,929 lbs | 88.0 tons | 782.6 kN |
| 4,000 PSI | 201,062 lbs | 100.5 tons | 894.4 kN |
| 5,000 PSI | 251,327 lbs | 125.7 tons | 1,118.0 kN |
| 6,000 PSI | 301,593 lbs | 150.8 tons | 1,341.6 kN |
| 8,000 PSI | 402,124 lbs | 201.1 tons | 1,788.7 kN |
| 10,000 PSI | 502,655 lbs | 251.3 tons | 2,235.9 kN |
How to Calculate 8″ Bore Cylinder Force
Force = Pressure × Piston Area
Area = π × (Bore ÷ 2)² = π × (4)² = 50.2655 in²
To find the push force of a 8″ bore hydraulic cylinder, multiply the operating pressure (in PSI) by the piston area (50.265 in²).
Example at 3,000 PSI:
Force = 3,000 × 50.2655 = 150,796 lbs (75.4 tons)
Rod-Side (Pull) Force
The retract force is always less than the push force because the rod displaces part of the piston area. To calculate pull force, subtract the rod cross-section area from the bore area:
Pull Force = Pressure × (Bore Area − Rod Area)
Important Notes
- These are theoretical forces. Real-world output is 3-5% less due to seal friction.
- Rod diameter matters for retract force — larger rods reduce pull force significantly.
- Never exceed rated pressure. Most industrial cylinders are rated for 3,000 or 5,000 PSI.
- Dynamic vs static: Moving loads require additional force to overcome inertia and friction.
Other Bore Sizes
- 1″ bore force chart
- 1.5″ bore force chart
- 2″ bore force chart
- 2.5″ bore force chart
- 3″ bore force chart
- 3.25″ bore force chart
- 3.5″ bore force chart
- 4″ bore force chart
Need custom calculations?
Use our Interactive Hydraulic Cylinder Calculator for any bore, rod, and pressure combination.
Stop looking it up twice — run the numbers and keep the record.
This reference is free forever. When you need to actually calculate, document, and defend the result, do it in the app — then export a clean report you can hand to a reviewer.
- ✓46 engineering calculators, unlimited
- ✓Save & reload every calculation
- ✓Organize work into project folders
- ✓Branded, PE-stamped PDF reports
Free plan, no credit card. Upgrade only when it's paying for itself.