6206
Deep Groove Ball Bearing · 6200 Series
| Property | Value |
|---|---|
| Designation | 6206 |
| Type | Deep Groove Ball Bearing |
| Bore Diameter (d) | 30 mm (1.181″) |
| Outside Diameter (D) | 62 mm (2.441″) |
| Width (B) | 16 mm (0.630″) |
| Dynamic Load Rating (Cr) | 19.5 kN (4384 lbf) |
| Static Load Rating (C0r) | 11.2 kN (2518 lbf) |
Deep groove ball bearings are the most widely used bearing type. They handle radial loads, moderate axial loads in both directions, and operate at high speeds. Available with shields (ZZ) or seals (2RS) for contamination protection.
Use the Bearing Life Calculator to determine service life with Cr = 19.5 kN, or the Selection Wizard to compare alternatives. For shaft and housing tolerances, use the Fit Calculator with bore = 30 mm.
Bearing Tools
- Bearing Life Calculator (L10) — Calculate service life from load and speed
- Bearing Fit & Tolerance — Shaft and housing tolerances
- Bearing Speed (DN Value) — Speed capability assessment
- Equivalent Dynamic Load — Combined radial + axial to P
- Bearing Selection Wizard — Find the right bearing
- Elastomeric Pad Designer — AASHTO LRFD bridge bearings
Dimensions and load ratings are typical catalog values. Always verify against the specific manufacturer catalog for your application. Variants (shielded -ZZ, sealed -2RS, clearance C3) have identical dimensions and load ratings.
Stop looking it up twice — run the numbers and keep the record.
This reference is free forever. When you need to actually calculate, document, and defend the result, do it in the app — then export a clean report you can hand to a reviewer.
- ✓46 engineering calculators, unlimited
- ✓Save & reload every calculation
- ✓Organize work into project folders
- ✓Branded, PE-stamped PDF reports
Free plan, no credit card. Upgrade only when it's paying for itself.