Cylinder Bore: 6″ | Piston Area: 28.274 in²
At 3,000 PSI → 84,823 lbs (42.4 tons)
6″ Bore Hydraulic Cylinder Force Table
| Pressure | Force (lbs) | Force (tons) | Force (kN) |
|---|---|---|---|
| 500 PSI | 14,137 lbs | 7.1 tons | 62.9 kN |
| 1,000 PSI | 28,274 lbs | 14.1 tons | 125.8 kN |
| 1,500 PSI | 42,412 lbs | 21.2 tons | 188.7 kN |
| 2,000 PSI | 56,549 lbs | 28.3 tons | 251.5 kN |
| 2,500 PSI | 70,686 lbs | 35.3 tons | 314.4 kN |
| 3,000 PSI | 84,823 lbs | 42.4 tons | 377.3 kN |
| 3,500 PSI | 98,960 lbs | 49.5 tons | 440.2 kN |
| 4,000 PSI | 113,097 lbs | 56.5 tons | 503.1 kN |
| 5,000 PSI | 141,372 lbs | 70.7 tons | 628.9 kN |
| 6,000 PSI | 169,646 lbs | 84.8 tons | 754.6 kN |
| 8,000 PSI | 226,195 lbs | 113.1 tons | 1,006.2 kN |
| 10,000 PSI | 282,743 lbs | 141.4 tons | 1,257.7 kN |
How to Calculate 6″ Bore Cylinder Force
Force = Pressure × Piston Area
Area = π × (Bore ÷ 2)² = π × (3)² = 28.2743 in²
To find the push force of a 6″ bore hydraulic cylinder, multiply the operating pressure (in PSI) by the piston area (28.274 in²).
Example at 3,000 PSI:
Force = 3,000 × 28.2743 = 84,823 lbs (42.4 tons)
Rod-Side (Pull) Force
The retract force is always less than the push force because the rod displaces part of the piston area. To calculate pull force, subtract the rod cross-section area from the bore area:
Pull Force = Pressure × (Bore Area − Rod Area)
Important Notes
- These are theoretical forces. Real-world output is 3-5% less due to seal friction.
- Rod diameter matters for retract force — larger rods reduce pull force significantly.
- Never exceed rated pressure. Most industrial cylinders are rated for 3,000 or 5,000 PSI.
- Dynamic vs static: Moving loads require additional force to overcome inertia and friction.
Other Bore Sizes
- 1″ bore force chart
- 1.5″ bore force chart
- 2″ bore force chart
- 2.5″ bore force chart
- 3″ bore force chart
- 3.25″ bore force chart
- 3.5″ bore force chart
- 4″ bore force chart
Need custom calculations?
Use our Interactive Hydraulic Cylinder Calculator for any bore, rod, and pressure combination.
Stop looking it up twice — run the numbers and keep the record.
This reference is free forever. When you need to actually calculate, document, and defend the result, do it in the app — then export a clean report you can hand to a reviewer.
- ✓46 engineering calculators, unlimited
- ✓Save & reload every calculation
- ✓Organize work into project folders
- ✓Branded, PE-stamped PDF reports
Free plan, no credit card. Upgrade only when it's paying for itself.